Aluminiumlegeringen TIG ER5356 Lasverbindingen
CHEMISCHE COMPONET:
LEGERING (gew.%) | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Be | S |
GB/T-REGELS | 0,25 | 0,40 | 0,10 | 0,05-0,2 | 4,5-5,5 | 0,05-0,2 | 0,10 | 0,06-0,2 | 0,0005 | Marge |
AWS-REGELS | 0,25 | 0,40 | 0,10 | 0,05-0,2 | 4,5-5,5 | 0,05-0,2 | 0,10 | 0,06-0,2 | 0,0008 | Marge |
VOORBEELD WAARDE | 0,15 | 0,10 | 0.03 | 0,15 | 5.2 | 0.1 | 0,05 | 0,12 | 0,0003 | Marge |
MECHANISCHE EIGENSCHAP:
EIGENDOM | OPBRENGST STERKTE (MPa) | UITBREIDING STERKTE (MPa) | Ouder metaal | REK(%) | Hittebehandeling | ||||||
GB/T-REGELS | - | - | - | - | - | ||||||
AWS-REGELS | - | - | - | - | - | ||||||
VOORBEELD WAARDE | 105 | 205 | 2014-0 | 17 | AW |
Het hoofdbestanddeel is ALMg5Cr.
k5% magnesium gieten en smeden van aluminiumlegering lassen of oppervlakteverharding, universeel lasmateriaal, hoge sterkte, goede kneedbaarheid, goede corrosieweerstand.
Soepele draadaanvoer, stabiele boogverbranding, spatten vormen zich zelden mooi.
-
Lasmateriaal voor aluminiumlegeringen
-
Reactor van polypropyleen
-
Gansu Lanke Petrochemical -50 ℃ bolvormig propaantankproject
CHEMISCHE COMPONET:
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Be | S | |
GB/T-REGELS | 0,25 | 0,40 | 0,10 | 0,05-0,2 | 4,5-5,5 | 0,05-0,2 | 0,10 | 0,06-0,2 | 0,0005 | Marge |
AWS-REGELS | 0,25 | 0,40 | 0,10 | 0,05-0,2 | 4,5-5,5 | 0,05-0,2 | 0,10 | 0,06-0,2 | 0,0008 | Marge |
VOORBEELD WAARDE | 0,15 | 0,10 | 0.03 | 0,15 | 5.2 | 0.1 | 0,05 | 0,12 | 0,0003 | Marge |
MECHANISCHE EIGENSCHAP:
EIGENDOM | OPBRENGST STERKTE (MPa) | UITBREIDING STERKTE (MPa) | Ouder metaal | REK(%) | Hittebehandeling | ||||||
GB/T-REGELS | - | - | - | - | - | ||||||
AWS-REGELS | - | - | - | - | - | ||||||
VOORBEELD WAARDE | 105 | 205 | 2014-0 | 17 | AW |
Schrijf hier uw bericht en stuur het naar ons op